Floor standing, high output, three phase electric boiler. Use as a primary heat source or emergency back up.
Floor standing high output electric boiler
Steel heating body and removable stainless steel heating elements
Six standard models of 57.6 to 259 kW
Four power stages – controlled by a stage delay timer
Can easily be de-rated to provide less output if required
Fully wired power and control circuits
50mm rigid polyurethane foam insulation
Stove enamelled casing
Control panel including thermostats, thermometer, indicators and on/off switch
Very little maintenance required
Can also be used in multiple boiler installations
The ACV E-Tech P electric boilers are ideal for all tertiary applications requiring high heating output. They can be connected to any ACV water heater.
Control
The E-Tech P boilers are equipped with an electronic sequencing control who adapts constantly the power to the real needs thanks to a 4 stages modulation. The boiler is commonly controlled by an external contact (i.e. room thermostat). The maximum power can be limited to 25%, 50% or 75% by moving electrical bridges.
Electrical protections
The control circuit is protected by an internal 3 Amp MCB. The power circuit is protected at its entrance by 3 power fuses. Moreover, each contactor - supplying a pair of electric stars (28,8kW) - is protected by an automatic thermal and magnetic safety relay.
Compact floor standing combination electric boiler. Flexible installation options.
The E-Tech S is the first electric boiler in the world that combines the benefits of electric heating with the advantages of the Tank-in-Tank system.
Sensible Efficiency
For electric to succeed, it is vital that every watt of input finishes up as useful hot water and heating. This new range of E-Tech S Tank-in-Tank thermal storage units is designed to do just that. Three conveniently sized models are available and each benefits from the clever integration of our stainless steel Tank-in-Tank technology with an equally advanced electric boiler control system. Cupro incoyloy elements within the primary water provide the electrical energy.
Installation Flexibility Three choices for heating connections.The boiler can be installed:
Against the wall
In a corner facing left
In a corner facing right
How It Works
An inner stainless steel hot water storage tank draws heat from primary water circulating through an outer tank which is heated by heavy duty elements. As they’re immersed in primary water only, the heating elements are unlikely to be affected by scaling and input to them is modulated by a dual stage thermostat to reduce cycling and load switching. The special design of the inner DHW tank not only helps ensure scale-free operation, but also avoids the sediment problems that plague conventional cylinders. To fully utilise generated energy the Tank-in-Tank unit is wrapped in a generous 70mm of polyurethane insulation.
Benefits and Features
Quiet operation
No flue
Reduced maintenance (no landlord certification)
Can be used as a stand-alone water heater
Modulating element input
High hot water storage temperature reduces legionellae bacteria risk
Flexible installation options for flow and return connections
Vented or unvented use with pressure System Packs available
Integral primary heating sealed system kit and circulating pump
Wall mounted electric sealed system boiler. An economical alternative to LPG and Oil.
The E-tech w range is a line of wall-hung electric boilers for heating only. Available up to 15 kW for single phase supply and, where available, three phase options up to 36 kW. The E-Tech W is user and installer-friendly with simplified maintenance. The control panel can be rotated to facilitate access to the water connections. The unit is of a steel body with removable stainless steel incoloy elements to increase the reliability and the service life of your installation.
Benefits and Features
No flue
Reduced maintenance (no landlord certification)
Modulating element input
Can be used in modular formation
Compatible with Honeywell S-plan and Y-plan wiring systems
Built-in control circuit protected by internal 3 amp MCB
Removable stainless steel incoloy immersion elements
Stove enamelled casing
Control panel including thermostats, combined temperature and pressure gauge and on/off switch
Wall mounting bracket included
Simple connection to heating systems
Compatible with wet radiator or underfloor heating installations
Ease of installation - the boiler allows direct connection to a heating system without the nee for a feed and expansion tank
Easy connection to underfloor heating
In contrast with electric underfloor heating, hydraulic circuits are compatible with multiple-energy systems (electricity, gas, fuel-oil, heat pump, solar, etc). This allows the user to adapt to changes in the market and to opt for alternative sources of energy.
The HeatMaster® is a high-performance hot water generator that can also be used as a boiler for heating.
It combines the advantages of integrated hot water storage generators and direct hot water generators whilst avoiding the drawbacks of bulkiness, cost and operating efficiency on the one hand and the problem of lime scale formation on the other.
The hot water tank is made of stainless steel. It constitutes the inner tank of the Tank-in-Tank water heater, completely immersed in the primary water of the heating circuit.
Incorporated into HeatMaster Scheme
This solution combines the advantages of large storage capacity with those of instantaneous DHW generation. It eliminates all of the problems associated with space and maintenance requirements, reducing operating costs as well as ensuring outstanding domestic hot water performance levels.
Efficiency
Its large heat exchange surface (1.5 to 2.5 times more than that of a traditional coil) enables it to heat a large quantity of domestic hot water in a very short time, which reduces the volume of water stored and limits energy losses.
Tank-in-Tank floor standing indirect hot water storage tank
Stainless steel construction - no need for sacrificial anodes
High performance - fast heat up and rapid recovery
Fully insulated
Stove enamelled steel casing, supplied separately to enable the tank to pass through standard 800mm doorways
Two sizes - 800 and 1000 litres
Can be used in battery formation for high output installations
Vented or unvented use, with mains pressure SystemPak available
Large heating surface area means reduced boiler cycling
Featuring a heat exchanger with stainless steel flue way, the Prestige range of wall-hung gas-fired condensing boilers reflects ACV’s 80 years of experience in the use of stainless steel for heating and generating hot water. Prestige boilers are equally capable of meeting both individual needs and the demands of tertiary applications.
They can be cascaded to increase available output or installed in combination with HeatMasters or ACV water heaters for maximum stability of hot water supply.
Trimmed with high quality injected polyurethane in a polypropylene casing, the SmartLine range features all the advantages of ACV’s top of the line Tank-in-Tank water heaters.
The standard SmartLine range is complemented by the SmartLine E range, which can be fitted with an electric heating element booster system, and by the SmartLine Multienergy, which is specially designed for applications such as solar power, heat pumps, air conditioning and central or urban heating.
