 |
|
|
|
SMART 100
|
|
|
|
|
|
|
|
- Multi-position indirect water heater: floor standing or vertical wall hung
- High quality insulation: 50 mm polyurethane. Static loss less than 3°C in 8 hours!
- Deluxe finish : elegant casing made of shock-proof, thick polypropylene. Product nameplate with detachable logos according to mounting position
- 6 models of 90, 100, 130, 160, 210 et 240 litres
- Control thermostat on models 100 up to 240, optional on model 90+ (replaceable by an NTC probe for use ith an electronically controlled boiler)
- Wall brackets and injection pipe delivered as standard for mounting boiler with DHW connections downwards
- Maximum absorbed boiler output: from 23 to 68 kW
Main characteristics
 |
Capacity (total) (L) : |
105 |
|
Peak flow at 40 °C (L/10’) : |
236 |
|
Max. absorbed heat (Heat source: boiler) (kW) : |
23 |
|
Dim. - Width or Diameter (w/o conn.) (mm) : |
565 |
|
Dim. - Height (w/o conn.) (mm) : |
800 |
|
| (*) |
- The product range offered can vary according to country. Please consult your distributor.
- All values indicated on this site are provided for information only. Please refer to our legal notice.
- The following operating conditions were used to generate hot water output data for our products:
- Supply water: 10°C
- Primary water: 80°C (boilers), 85°C (water heaters) or 90°C (HeatMaster)
- Operating conditions
Cold water: 10°C
Delta T° (outlet) : 30°C
Data provided are indicative only. Please read the complete disclaimer.
|
|
|
|
|
Published by ACV international SA - Registered in Sint-Pieters-Leeuw,
Belgium under the number 0464.842.608
Presentation
