ACV Excellence in Hot water  >  ACV Hot water Tanks and Boilers  >  HeatMaster 200 N

HeatMaster 200 N

 Presentation Design characteristics Technical specifications Output data
Print


Product description (*)
HeatMaster 200 N
Chimney Floor installation Dual-fuel (gas and fuel oil compatible) [ Legend ]
 

High performance heating and hot water generator. Can also be used as a stand alone hot water generator capable of operating at an elevated temperature.

Tank-in-Tank type exchanger/accumulator

The HeatMaster® series differs from traditional hot water generators because of its ring-shaped tank immersed in the primary fluid contained in the outer body. The inner tank is itself a stainless steel heat exchanger with a large surface area that enables the water to be heated very quickly.

Self-descaling

The tank has freedom of movement: its walls expand and contract with the changes in pressure thus preventing scale forming on the walls. Finally, the cold water injected strikes against the bottom of the tank and carries all suspended particles into the system, helping to prevent deposits forming in the tank. This unique self-descaling feature ensures that the boiler always operates with maximum efficiency.

Features

  • Very high performance combined boiler and water heater
  • Stainless steel Tank-in-Tank design
  • Stainless steel Tank-in-Tank design
    • Pressure jet natural gas or LPG (Riello)
    • Pressure jet 35 sec oil (Riello)
  • Can also be used as a stand-alone water heater
  • Anti-Legionellae: hot water stored at a consistently high temperature
  • Built-in primary circuit shunt pumps
  • Fully insulated with very thick mineral wool
  • Stove enamelled casing
  • Control panel including thermostats, combined temperature and pressure gauge, indicators and on/off switch
  • 178 kW output and up to 3348 litres of hot water at 60°C in one hour
  • Vented or unvented use, with mains pressure SystemPaks available
  • Anti-stratification pumps as standard

HeatMaster® 200 N

  • High performance water heater
  • Performance:
    • 1570 litres in 10 minutes
    • 4920 litres in 60 minutes
  • Compatible with pressure jet and forced draught burner
  • Maximum output 141.7kW

HeatMaster® 200 F

  • High performance water heater
  • Performance:
    • 1675 litres in 10 minutes
    • 5976 litres in 60 minutes
  • Supplied with Riello RG4S
    396 T1 fuel burner
  • Maximum output 180.3kW

HeatMaster control station
 
Main characteristics
 
Input max. (heating) (kW) : 154
Output power max. (80/60°C) (kW) : 141,7
Capacity (total) (L) : 641
Peak flow at 40 °C (L/10’) : 1570
Dim. - Width or Diameter (w/o conn.) (mm) : 1020
Dim. - Depth (w/o conn.) (mm) : 1020
Dim. - Height (w/o conn.) (mm) : 2085
 
(*)
  • The product range offered can vary according to country. Please consult your distributor.
  • All values indicated on this site are provided for information only. Please refer to our legal notice.
  • The following operating conditions were used to generate hot water output data for our products:
    • Supply water: 10°C
    • Primary water: 80°C (boilers), 85°C (water heaters) or 90°C (HeatMaster)
  • Operating conditions
    Cold water: 10°C
    Delta T° (outlet) : 30°C
    Data provided are indicative only. Please read the complete disclaimer.
Learn more about our products
Products of this range:

 

Subscribe to our email updates,

and receive invitations to trade shows.

 
Thanks for your interest.
 
Leave us a valid email, please.

SMART for LIFE

Life long guarantee on all the hot water cylinder in the Smart range from 100 to 400 litres.
» Register your guarantee