ACV Excellence in Hot water  >  ACV Hot water Tanks and Boilers  >  HeatMaster 201

HeatMaster 201

 Presentation Design characteristics Technical specifications Output data
Print


Product description (*)
HeatMaster 201
All Floor installation Gas [ Legend ]
 

High performance combined boiler and water heater with fully modulating burner technology.

The HeatMaster is a high performance hot water producer: its annular Tank-in-Tank holds a volume of hot water for peak demand. This combines the advantages of a hot water producer with integrated storage and of an instantaneous water heater, while avoiding the disadvantages of space, cost and efficiency.

All ACV stainless steel Tank-in-Tank products, it can operate at high temperature (over 90°C).

The HeatMaster has a primary circuit and can therefore also be used as a central heating boiler.

Exceptional Performance

The MCBA electronic controller regulates the boiler (start-up, safety, modulation), the shunt pump and the heating pump in response to hot water and heating demand. The MCBA offers numerous advanced features:

  • A large burner modulation range - down to less than 30%
  • The hot water tank is always kept at an optimum temperature
  • Excellent hot water performance
  • Energy efficiency is optimised in both hot water and heating modes.

Product Features

  • Very high performance fully modulating combined boiler and water heater
  • Stainless steel Tank-in-Tank design
  • Low-NOx premix natural gas/LPG modulating burner, from 56 to 214 kW
  • Can also be used as a stand-alone water heater
  • Anti-Legionellae: hot water stored at a consistently high temperature
  • Built-in primary circuit shunt pump
  • Fully insulated with 50mm rigid polyurethane foam
  • Stove enamelled casing
  • Control panel including digital MCBA controller complete with self diagnostic system and combined temperature and pressure gauge
  • Up to 3534 litres of hot water at 60°C in one hour
  • Vented or unvented use, with mains pressure SystemPaks available

 
Main characteristics
 
Input max. (heating) (kW) : 220
Input min. (heating) (kW) : 60
Output power max. (80/60°C) (kW) : 200,2
Efficiency (max. output) 80/60°C (%) : 91,5
Capacity (total) (L) : 641
Peak flow at 40 °C (L/10’) : 1745
Dim. - Width or Diameter (w/o conn.) (mm) : 1020
Dim. - Depth (w/o conn.) (mm) : 1320
Dim. - Height (w/o conn.) (mm) : 2085
 
(*)
  • The product range offered can vary according to country. Please consult your distributor.
  • All values indicated on this site are provided for information only. Please refer to our legal notice.
  • The following operating conditions were used to generate hot water output data for our products:
    • Supply water: 10°C
    • Primary water: 80°C (boilers), 85°C (water heaters) or 90°C (HeatMaster)
  • Operating conditions
    Cold water: 10°C
    Delta T° (outlet) : 30°C
    Data provided are indicative only. Please read the complete disclaimer.
Learn more about our products
Products of this range:

 

Subscribe to our email updates,

and receive invitations to trade shows.

 
Thanks for your interest.
 
Leave us a valid email, please.

SMART for LIFE

Life long guarantee on all the hot water cylinder in the Smart range from 100 to 400 litres.
» Register your guarantee