E-tech S 160 (V10)

Available documents

	E-Tech S : Sales brochure
	E-Tech S : Sales brochure UK
	E-tech S : Installation and service instructions
	E-tech S 160 (600 x 600) : Installation and service instructions
	E-tech S KIWA (UK)
	E-tech S (V10) : Installation and service instructions

- Download centre

Presentation

Dual application electric boiler with stainless steel Tank-in-Tank cylinder
Ready to use. Fitted with expansion vessel, manothermometer, safety valve, low water pressure switch, circulator
Thick rigid polyurethane foam insulation (70 mm)
Installation flexibility
Power modulation according to heat demand
Day - night function: enables the volume of water to be stored at high temperature during the low tariff period (night)
Booster function: operation at maximum power for extra high demand during the high tariff period
Two electric safety devices on the control and power circuits
Stainless steel removable immersion resistances
All the advantages of ACV electric boilers and of Tank-in-Tank system

Main characteristics

	Output power max. (80/60°C) (kW) :	14,4
	Capacity (domestic hot water) (L) :	99
	Capacity (total) (L) :	167
	Capacity expansion tank(s) (L) :	12
	Heating surface DHW tank (m²) :	1,26
	Connection - heating (Ø) :	1"
	Connection - DHW (Ø) :	3/4"
	Connection - re-circulation / safety valve (Ø) :	3/4" (M)
	Peak flow at 40 °C (L/10’) :	356
	Peak flow 1st hour at 40 °C (L/60') :	873
	Continuous flow at 40°C (L/h) :	620
	Max. operating temperature (heating) (°C) :	85
	Max.service pressure heating (primary) (bar) :	3
	Max.service pressure (DHW) (bar) :	10
	Power (nbr) of heating elements (W) :	2.400 (x 12)
	Operating voltage (50Hz) (V) :	3x400 (+ N)
	Dim. - Width or Diameter (w/o conn.) (mm) :	590
	Dim. - Depth (w/o conn.) (mm) :	728 (incl.EV)
	Dim. - Height (w/o conn.) (mm) :	1342
	Weight (empty) (kg) :	115

Design characteristics

Legend

Technical specifications (*)

Characteristics		Value
Output power max. (80/60°C)		14,4 kW
Capacity (domestic hot water)		99 L
Capacity (total)		167 L
Capacity expansion tank(s)		12 L
Heating surface DHW tank		1,26 m²
Connection - heating		1" Ø
Connection - DHW		3/4" Ø
Connection - re-circulation / safety valve		3/4" (M) Ø
Peak flow at 40 °C		356 L/10’
Peak flow 1st hour at 40 °C		873 L/60'
Continuous flow at 40°C		620 L/h
Max. operating temperature (heating)		85 °C
Max.service pressure heating (primary)		3 bar
Max.service pressure (DHW)		10 bar
Power (nbr) of heating elements		2.400 (x 12) W
Operating voltage (50Hz)		3x400 (+ N) V
Dim. - Width or Diameter (w/o conn.)		590 mm
Dim. - Depth (w/o conn.)		728 (incl.EV) mm
Dim. - Height (w/o conn.)		1342 mm
Weight (empty)		115 kg

Output data

The product range offered can vary according to country. Please consult your distributor.
All values indicated on this site are provided for information only. Please refer to our legal notice.
The following operating conditions were used to generate hot water output data for our products:

Operating conditions
Cold water: 10°C
Delta T° (outlet) : 30°C
Data provided are indicative only. Please read the complete disclaimer.

a b

and receive invitations to trade shows.

Life long guarantee on all the hot water cylinder in the Smart range from 100 to 400 litres.
» Register your guarantee

Published by ACV international SA - Registered in Sint-Pieters-Leeuw, Belgium under the number 0464.842.608