ACV - excellence in hot water

Discover our solutions > SLEW 130 Duplex


SLEW 130 Duplex
Presentation
 
N/A Wall installation With electrical resistor as alternative source of power [ Legend ]
 
  • With 2200W electrical heating element
  • Inner tank made of Duplex stainless steel  with exceptional resistence to corrosion
  • High quality insulation: 50 mm polyurethane. Static loss less than 3°C in 8 hours!
  • Deluxe finish : elegant casing made of shock-proof, thick polypropylene.
  • Control thermostat
  • Wall brackets and injection pipe delivered as standard for installation with DHW connections downwards


Main characteristics
 
Capacity (primary) (L) : 31
Capacity (total) (L) : 130
Heating surface DHW tank (m²) : 1,26
Pressure drop (primary) (mbar) : 22
Primary flow (L/h) : 2600
Connection - primary (female) (Ø) : 1"1/4
Connection - DHW (Ø) : 3/4"
Connection - re-circulation / safety valve (Ø) : 3/4" (F)
Peak flow at 40 °C (L/10’) : 321
Peak flow 1st hour at 40 °C (L/60') : 1063
Continuous flow at 40°C (L/h) : 890
Peak flow at 45 °C (L/10’) : 275
Peak flow 1st hour at 45 °C (L/60') : 911
Continuous flow at 45 °C (L/h) : 763
Peak flow at 60 °C (L/10’) : 161
Peak flow 1st hour at 60 °C (L/60’) : 549
Continuous flow at 60 °C (L/h) : 465
Heating time from 10 to 80°C (Heat source: boiler) (min) : 22
Warm-up time (10 to 60°C) with heating element(s) (h:min) : 3:27
Max. absorbed heat (Heat source: boiler) (kW) : 31
Max. operating temperature (heating) (°C) : 90
Max.service pressure heating (primary) (bar) : 3
Power (nbr) of heating elements (W) : 2.200
Dim. - Width or Diameter (w/o conn.) (mm) : 565
Dim. - Height (w/o conn.) (mm) : 960
Weight (empty) (kg) : 55
 


Design characteristics
 

Design characteristics
  1. Auxiliary connection DHW
  2. Cold water inlet connection
  3. Control thermostat
  4. Flow connection (primary circuit)
  5. Polyurethane foam insulation
  6. Return connection (primary circuit)
  7. Outer steel tank (primary circuit)
  8. Manual air purge
  9. Hot water connection
  10. Polypropylene top lid
  11. Stainless steel tank (DHW)
  12. Polypropylene shell
  13. Polypropylene bottom lid
  14. Control panel
  15. Electric heating element 2200 W
  16. Dry well
 
 
Technical specifications (*)
 

Characteristics Value
 Capacity (primary)  31 L
 Capacity (total)  130 L
 Heating surface DHW tank  1,26 m²
 Pressure drop (primary)  22 mbar
 Primary flow  2600 L/h
 Connection - primary (female)  1"1/4 Ø
 Connection - DHW  3/4" Ø
 Connection - re-circulation / safety valve  3/4" (F) Ø
 Peak flow at 40 °C  321 L/10’
 Peak flow 1st hour at 40 °C  1063 L/60'
 Continuous flow at 40°C  890 L/h
 Peak flow at 45 °C  275 L/10’
 Peak flow 1st hour at 45 °C  911 L/60'
 Continuous flow at 45 °C  763 L/h
 Peak flow at 60 °C  161 L/10’
 Peak flow 1st hour at 60 °C  549 L/60’
 Continuous flow at 60 °C  465 L/h
 Heating time from 10 to 80°C (Heat source: boiler)  22 min
 Warm-up time (10 to 60°C) with heating element(s)  3:27 h:min
 Max. absorbed heat (Heat source: boiler)  31 kW
 Max. operating temperature (heating)  90 °C
 Max.service pressure heating (primary)  3 bar
 Power (nbr) of heating elements  2.200 W
 Dim. - Width or Diameter (w/o conn.)  565 mm
 Dim. - Height (w/o conn.)  960 mm
 Weight (empty)  55 kg

Output data
 

Characteristics Value
 Peak flow at 40 °C  321 L/10’
 Peak flow 1st hour at 40 °C  1063 L/60'
 Continuous flow at 40°C  890 L/h
 Peak flow at 45 °C  275 L/10’
 Peak flow 1st hour at 45 °C  911 L/60'
 Continuous flow at 45 °C  763 L/h
 Peak flow at 60 °C  161 L/10’
 Peak flow 1st hour at 60 °C  549 L/60’
 Continuous flow at 60 °C  465 L/h
 Heating time from 10 to 80°C (Heat source: boiler)  22 min
 Warm-up time (10 to 60°C) with heating element(s)  3:27 h:min
 Max. absorbed heat (Heat source: boiler)  31 kW

 

(*)
  • The product range offered can vary according to country. Please consult your distributor.
  • All values indicated on this site are provided for information only. Please refer to our legal notice.
  • The following operating conditions were used to generate hot water output data for our products:
    • Supply water: 10°C
    • Primary water: 80°C (boilers), 85°C (water heaters) or 90°C (HeatMaster)
  • Operating conditions
    Cold water: 10°C
    Delta T° (outlet) : 30°C
    Data provided are indicative only. Please read the complete disclaimer.

Subscribe to our email updates,

and receive invitations to trade shows.

 
Thanks for your interest.
 
Leave us a valid email, please.

SMART for LIFE

Life long guarantee on all the hot water cylinder in the Smart range from 100 to 400 litres.
» Register your guarantee