HeatMaster

The HeatMaster® is a high-performance hot water generator that can also be used as a boiler for heating.

It combines the advantages of integrated hot water storage generators and direct hot water generators whilst avoiding the drawbacks of bulkiness, cost and operating efficiency on the one hand and the problem of lime scale formation on the other.

Product (*)

Description (*)

HeatMaster 35 TC

Totally condensing combined boiler and water heater. Gas-fired, with modulating pre-mix burner (chimney or balanced flue)

[ legend ]

Input max. (heating) (kW) : 34,9 (G20) - 30,6 (G31)
Input min. (heating) (kW) : 10 (G20-G31)
Output power max. (80/60°C) (kW) : 34,1 (G20) - 29,9 (G31)
Efficiency (max. output) 80/60°C (%) : 97
NOx emissions (weighted) (mg/kWh) : 40.3
Capacity (total) (L) : 186,5
Peak flow at 40 °C (L/10’) : 472
Dim. - Width or Diameter (w/o conn.) (mm) : 600
Dim. - Depth (w/o conn.) (mm) : 670
Dim. - Height (w/o conn.) (mm) : 1700

HeatMaster 70 TC

Totally condensing combined 69,9 KW boiler and water heater. Gas-fired, with modulating pre-mix burner (chimney or balanced flue)

[ legend ]

Input max. (heating) (kW) : 69,9 (G20-G31)
Input min. (heating) (kW) : 17,2 (G20-G31)
Output power max. (80/60°C) (kW) : 68,2 (G20-G31)
Efficiency (max. output) 80/60°C (%) : 97
NOx emissions (weighted) (mg/kWh) : 28
Capacity (total) (L) : 315
Peak flow at 40 °C (L/10’) : 825
Dim. - Width or Diameter (w/o conn.) (mm) : 690
Dim. - Depth (w/o conn.) (mm) : 725
Dim. - Height (w/o conn.) (mm) : 2115

HeatMaster 85 TC

Totally condensing combined 85 KW boiler and water heater. Gas-fired, with modulating pre-mix burner (chimney or balanced flue)

[ legend ]

Input max. (heating) (kW) : 85 (G20-G31)
Input min. (heating) (kW) : 17,2 (G20-G31)
Output power max. (80/60°C) (kW) : 83.3 (G20-G31)
Efficiency (max. output) 80/60°C (%) : 97
NOx emissions (weighted) (mg/kWh) : 44
Capacity (total) (L) : 315
Peak flow at 40 °C (L/10’) : 868
Dim. - Width or Diameter (w/o conn.) (mm) : 690
Dim. - Depth (w/o conn.) (mm) : 725
Dim. - Height (w/o conn.) (mm) : 2115

HeatMaster 120 TC

Totally condensing combined 120 KW boiler and water heater. Gas-fired, with modulating pre-mix burner (chimney or balanced flue)

[ legend ]

Input max. (heating) (kW) : 115 (G20-G31)
Input min. (heating) (kW) : 23.2 (G20)-24.8 (G31)
Output power max. (80/60°C) (kW) : 111.1 (G20-G31)
Efficiency (max. output) 80/60°C (%) : 96.6 (G20-G31)
NOx emissions (weighted) (mg/kWh) : 56
Capacity (total) (L) : 323
Peak flow at 40 °C (L/10’) : 974
Dim. - Width or Diameter (w/o conn.) (mm) : 690
Dim. - Depth (w/o conn.) (mm) : 725
Dim. - Height (w/o conn.) (mm) : 2200

(*)

The product range offered can vary according to country. Please consult your distributor.
All values indicated on this site are provided for information only. Please refer to our legal notice.
The following operating conditions were used to generate hot water output data for our products:

Supply water: 10°C
Primary water: 80°C (boilers), 85°C (water heaters) or 90°C (HeatMaster)

Operating conditions
Cold water: 10°C
Delta T° (outlet) : 30°C
Data provided are indicative only. Please read the complete disclaimer.

Learn more about our products

a b

Subscribe to our email updates,

and receive invitations to trade shows.

SMART for LIFE

Life long guarantee on all the hot water cylinder in the Smart range from 100 to 400 litres.
» Register your guarantee

Published by ACV international SA - Registered in Sint-Pieters-Leeuw, Belgium under the number 0464.842.608