Smart E 160

Fast recovery floor standing Tank-in-Tank Cylinder - standard 3kW immersion, perfect partner to condensing boilers.

# 06618901

  • External heating source
  • Add-on electricity
  • Tanks
  • Floor installation
  • 3.5Bar Mains water Systempak and DHW mixing valve supplied as standard
  • 3kW Immersion heater as standard - 6kW option available
  • 6 pin plug-and-play electrical connection, S Plan or Y Plan
  • Low Heat Loss - 50mm Polyurethane insulation
  • Thick polyurethane jacket. hard wearing and shock resistant.
  • Stainless steel domestic cylinder - 25 Year guarantee
  • Anti-Legionella : Storage temperature > 60°C.
  • Tank-in-Tank Technology


  1. Auxilliary connection DHW
  2. Domestic cold water inlet connection
  3. Flow connection (primary circuit)
  4. Polypropylene chell
  5. Internal stainless steel tank.
  6. Return connection (primary circuit)
  7. Immersion heater connection
  8. Primary air vent
  9. Hot water outlet connection
  10. Rigid polypropylene top cover
  11. Thermostat pocket
  12. Polyurethane foam insulation
  13. Outer steel tank (primary circuit)
  14. Polypropylene base


Capacity (total) 161 L
Heating surface DHW tank 1,26
Capacity (domestic hot water) 99 L
Connection - primary 1 F inches
Connection - DHW 3/4 M inches
Connection - re-circulation / safety valve 3/4 M inches
Connection - heating element 6/4 F inches
Primary flow (ΔT10K) do not use 2600 L/h
Pressure drop (primary - ΔT10K) 22 mbar
Max operating temperature 90 °C
Max operating pressure (DHW) 8,6 bar
Max operating pressure heating (primary) 3 bar
Weight (empty) 54 kg

Hot water performances

Peak flow at 40°C 321 L/10’
Peak flow 1st hour at 40°C 1063 L/60’
Continuous flow at 40°C 890 L/h
Peak flow 1st hour at 45°C 911 L/60’
Continuous flow at 45°C 763 L/h
Peak flow at 60°C 161 L/10’
Peak flow 1st hour at 60°C 549 L/60’
Continuous flow at 60°C 465 L/h
Pre-heating time from 10 to 80°C (Heat source: boiler) 22 min
Heating time from 10 to 60°C - 6 kW (3 kW) 97 (193) min
Max absorbed heat (Heat source: boiler) 31 kW
Voltage 230 V
Max design pressure (DHW) 10 bar
A 1225 mm
B 959 mm
C 725 mm
D - mm
Dim. - Height (with conn.) 1225 mm
Dim. - Height (w/o conn.) 1166 mm
Dim. - Width or Diameter (w/o conn.) 565 mm

Other products

Smart 320

Fast recovery Tank-in-Tank Cylinder - perfect partner to a condensing boiler

Smart 160 Green

Fast recovery Class 'A' Tank-in-Tank DHW cylinder

Smart E Plus 240

Fast recovery Tank-in-tank cylinder with the addition of multiple ports allowing flexible installati...

Smart E Plus 210

Fast recovery Tank-in-tank cylinder with the addition of multiple ports allowing flexible installati...

Find an installer

Get in touch with an installer for a free, no obligation estimate.

Call ACV

Need some answers? Talk to a specialist

Tel. +44 (0)1383 820100