Previous product Next product
Portrait

Smart ME 300

Stainless steel indirect cylinder with additional coil for use with multi-energy sources to produce domestic hot water.

  • Tank-in-Tank
  • Domestic and Commercial
Short Energy Label
  • label_energy_EXT
  • label_energy_RES
  • label_energy_SOL
  • Tanks
  • Floor installation
# GTIN : 5400891001912
# P/N : XB313000
Label 1
  • Ideal for use with renewable energy such as heat pumps, solar, heat recovery and in district heating schemes due to large primary store
  • Reduces legionella risk due to temperature: hot water stored at > 60°C
  • Low maintenance with no anode protection required
  • The carbon steel coil enables this product to be used in a variety of installations including system separation for a heating circuit
  • 5-year warranty
  • Low standing losses – cylinder comes with thick polypropylene jacket (100mm Polyurethane mattress for models SLME600 and SLME800)
  • Can provide dual temperature outputs for different circuits such as underfloor heating (low temperature) and DHW (high temperature)
  • Suitable for unvented systems –supplied as a complete package including 3.5 bar mains unvented kit*
  • Maximise capacity of the cylinder with DHW mixing valve and 2 port valve supplied as standard*
  • Supplied with 3kW immersion heater* (6kW option available)
  • Smaller models (SLME 400-600) fit through a standard doorway for access to plant room
  • Cost effective solution, simple installation with no de-stratification kit needed and no flue requirements
Schematic
  1. Primary hot water flow
  2. Primary return
  3. Coil flow
  4. Coil return
  5. Heating circuit flow
  6. Heating circuit return
  7. Drywell pocket for sensors
  8. Immersion heater connection (not available on SLME800)

Constructive characteristics

Smart ME 200 Smart ME 300 Smart ME 400 Smart ME 600 Smart ME 800
Capacity (total) L 203 303 395 606 800 L
Capacity (primary) L 95,7 165 219 365 517 L
Coil capacity L 8,3 12 12 16 20 L
Weight (empty) kg 68 99 120 180 220 kg
Max operating temperature °C 90 90 90 90 90 °C
Max operating pressure heating (primary) bar 3 4 4 4 4 bar
Max operating pressure (DHW) bar 8,6 8,6 8,6 8,6 8,6 bar
Max operating pressure (coil) bar 10 10 10 10 10 bar
Primary flow (EN 12897:2016) L/s 0,70 1,25 1,25 1,25 1,25 L/s
Primary heater pressure drop (EN12897:2016) mbar 41,6 51,2 53,5 55,6 58,5 mbar
Pressure drop coil mbar 460 533 533 186 216 mbar
Corresponding flow in coil L/h 3000 3000 3000 3000 3000 L/h
Connection - primary Ø" 1 F 1 F 1 F 1 F 1 F Ø"
Connection - DHW Ø" 3/4 M 3/4 M 3/4 M 3/4 M 1 ½ M Ø"
Connection - re-circulation / safety valve Ø" 3/4 M 3/4 M 3/4 M 3/4 M 1 ½ M Ø"
Connection - heating element Ø" 1 ½ F 1 ½ F 1 ½ F 1 ½ F - Ø"
Connection - coil Ø" 1 M 1 M 1 M 1 M 1 M Ø"
Heating surface coil 1,4 1,8 1,8 2,5 3

Heating characteristics

Smart ME 200 Smart ME 300 Smart ME 400 Smart ME 600 Smart ME 800
Reheat time (EN 12897:2016) min 10 10 10 10 10 min
Reheat performance (EN 12897:2016) kW 24,7 29,7 45,6 50,2 54 kW
Max absorbed heat (Heat source: coil) kW 16,3 19 25 29 35 kW
Max absorbed heat (Heat source: boiler) kW 31 32 43 48 73 kW

Domestic hot water performance

Smart ME 200 Smart ME 300 Smart ME 400 Smart ME 600 Smart ME 800
Peak flow at 40°C L/10’ 321 418 558 686 922 L/10’
Peak flow 1st hour at 40°C L/60’ 1063 1225 1633 1872 2666 L/60’
Continuous flow at 40°C L/h 890 967 1289 1423 2093 L/h
Peak flow at 45°C L/10’ 275 348 464 582 790 L/10’
Peak flow 1st hour at 45°C L/60’ 911 1003 1338 1559 2285 L/60’
Continuous flow at 45°C L/h 763 786 1048 1172 1794 L/h
Peak flow at 60°C L/10’ 161 206 274 358 504 L/10’
Peak flow 1st hour at 60°C L/60’ 536 590 786 935 1368 L/60’
Continuous flow at 60°C L/h 450 461 614 693 1037 L/h

Eco Design Fields

Smart ME 200 Smart ME 300 Smart ME 400 Smart ME 600 Smart ME 800
Energy efficiency storage class B C C - -
Standing loss (Energy label) W 57 77 87 120 134 W
Energy Label EU - -
Energy Label UK - -
Product Fiche

Technical brochure

Smart ME 200, 300, 400, 600, 800 - Installation, operation and maintenance instructions

3.20MB – en

Smart ME 300 Data Sheet

474.11kB – en

Thermostat mounting kit

506.07kB

Ecodesign

Energy Label EU

Energy Label UK

Product Fiche

BIM Files

BIM Files

Call ACV

Need some answers? Talk to a specialist

Tel. +44 (0)1383 820100