High Efficiency Boilers

HeatMaster N

HeatMaster® 30 N

High performance, combined direct fired boiler and water heater

  • TANK-IN-TANK technology 5 YEAR warranty

# A1002068

  • Fuel
  • Boilers
  • DHW Production
  • Standard
  • Floor installation
  • Stainless steel tank in tank design
  • Can also be used as a stand alone water heater
  • Choice of Burner:
  • - Low NOx premix gas or LPG
  • - Forced draught natural gas or LPG
  • - Pressure jet 28 sec or 35 sec oil
  • Anti-Legionellae: Hot water stored at a consistently high temperature
  • Built in Primary circuit shunt pump (HEP)
  • Body completely insulated in rigid polyurethane foam
  • Stove enameled casing
  • No need for sacrificial anodes
  • Control panel with Control Thermostat, T+P Gauge, Time Clock, Manual reset high limit thermostat, On/Off Switch, Summer/Winter Switch
  • Most heating demands can be met by connecting two or more HeatMasters together
  • Can be used in conjunction with Smart and Jumbo hot water storage tanks, supplying even the largest hot water requirement
  • Vented or unvented use, mains pressure Systempak available
  1. Limit thermostat 95 ° C / Thermometer / Thermostat Security 103 ° C.
  2. Domestic cold water inlet.
  3. Removable front casing.
  4. Rigid polyurethane insulation.
  5. Boiler charging pump.
  6. Control Thermostat.
  7. Burner cover.
  8. Burner (not provided)
  9. Flue reduction collar.
  10. Top metal casing.
  11. Heating circuit outlet.
  12. Domestic hot water outlet.
  13. Internal stainless steel tank.
  14. Flue pipes and turbulators
  15. External steel tank containing the primary fluid.
  16. Heating circuit return
  17. Primary circuit drain valve
  18. Combustion chamber
  19. Steel base

Constructive characteristics

Capacity (total) 151 L
Capacity (primary) 68 L
Capacity (domestic hot water) 83 L
Capacity expansion tank(s) 1 x 8 L
Chimney connection 150 Ømm
Connection - heating 6/4 F Ø"
Connection - DHW 3/4 M Ø"
Connection - safety valve 1/2 M Ø"
Max operating temperature 90 °C
Water pressure drop boiler at Δt = 20°C 27 mbar
Max service pressure heating (primary) 3 bar
Max service pressure (DHW) 8,6 bar
Weight (empty) 220 kg

Heating characteristics

Heating time from 10 to 90°C 34 min

Combustion

Input max (heating) HCV 38,8 kW
Input max (heating) LCV 34,9 kW
Efficiency at 30% load (EN677) 95,0 %
Efficiency (max output) 80/60°C 90 %
NOx class (EN483) 5
Output power max (80/60°C) 31,4 kW

Domestic hot water performance

Peak flow at 40°C 380 L/10’
Peak flow 1st hour at 40°C 1130 L/60’
Continuous flow at 40°C 900 L/h
Peak flow at 45°C 320 L/10’
Peak flow 1st hour at 45°C 963 L/60’
Continuous flow at 45°C 772 L/h
Peak flow at 60°C 201 L/10’
Peak flow 1st hour at 60°C 651 L/60’
Continuous flow at 60°C 540 L/h

Electrical Characteristics

Voltage 230 V
Frequency 50 Hz
Protection IP 30
Electrical consumption 82 W
Electrical power requirements 0,4 A
    • Technical brochure

    • HeatMaster 71, 101, 201 (v13) - Installation, operations and maintenance instructions

    • 5.79 MB – en

    • Technical brochure

    • Addendum HeatMaster 200N-200F (V13)

    • 487 KB –

    • Technical brochure

    • HeatMaster N - Installation, operations and maintenance instructions - v2013

    • 8.08 MB – ru

    • Technical brochure

    • Casing Assembly Instructions HeatMaster 201 v17

    • 9.89 MB –

    • Technical brochure

    • HeatMaster 71-101-201 (V13)

    • 5.81 MB – ru

    • Technical brochure

    • HeatMaster 200 N / 200 F (v13) : ИНСТРУКЦИЯ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И СЕРВИСНОМУ ОБСЛУЖИВАНИЮ

    • 5.04 MB – ru

    • Technical brochure

    • HeatMaster 201 (v17) - Installation, operations and maintenance instructions

    • 7.76 MB – en

    • Technical brochure

    • HeatMaster 200 N / 200 F (v13) : Installation, operation and maintenance instructions

    • 5.04 MB – en

    • Technical brochure

    • HeatMaster 201 Booster - Assembling and installation instructions

    • 761 KB – en

    • Technical brochure

    • HeatMaster N - Installation, operations and maintenance instructions - v2013

    • 8.06 MB – en

    • Technical brochure

    • Burner BG2000-M 201 installation instructions

    • 2.84 MB –

    • Marketing brochure

    • ACV Products Overview 2017

    • 3.96 MB – en

Other products

HeatMaster® 200 N
High Efficiency Boilers
HeatMaster® 60 N
High Efficiency Boilers
HeatMaster® 100 N
High Efficiency Boilers
HeatMaster® 200 F
High Efficiency Boilers
Find an installer

Get in touch with an installer for a free, no obligation estimate.

Call ACV

Need some answers? Talk to a specialist

Tel. +32 2 334 82 20