Condensing

BNE Condens

BNE 2 Condens

Oil fired condensing boiler with DHW production.

# 05647301

  • Fuel
  • Boilers
  • Standard
  • Floor installation
  • Water cooled combustion chamber.
  • Control panel including: main switch, summer-winter switch, control thermostat, mano-thermometer.
  • Integrated tank of 120 liters of type "Tank-in Tank".
  • Easy maintenance, removable burner door left / right.
  • Thermostat minimum 45 °C.
  • Oil burner BMR 33 blue flame.
  • Stainless steel condenser.
  • Burner assembly to be carried out on site.
  • Built-in electrical resistance of 2.4 kW.
  • Oil burner BMR 33 included.
  • 5 YEAR WARRANTY (see our conditions of sale)

Legend

  1. Chimney connection with measurement.
  2. Cold water inlet.
  3. DHW output.
  4. Manual air vent.
  5. Control panel.
  6. Safety thermostat.
  7. Rigid expanded polyurethane foam insulation.
  8. Sanitary tank type "Tank in Tank" in stainless steel.
  9. Condenser.
  10. Electrical resistance of 2,4 kW.
  11. Furnace.
  12. Heating circuit.
  13. Baffles (6 pieces).
  14. Firebrick fire door.
  15. Blue flame fuel burner.
  16. Removable cover
  17. Connection for the charging pump.
  18. Charging pump type Alpha.
  19. Thermostat minimum 45°C.
  20. Drain tap.
  21. Electrical connection of the boiler.
  22. Flue gas safety thermostat.
  23. Flue gas exhaust duct.
  24. Access door to the condenser.
  25. Heating circuit output.
  26. Auxiliary heating loop.
  27. Siphon.
  28. Condensate drain pipe.

Characteristics

Capacity (total) 186 L
Heating surface DHW tank 1,1
Capacity (domestic hot water) 120 L
Connection - DHW 3/4 M inches
Max operating temperature 90 °C
Max service pressure (DHW) 8,6 bar
Max service pressure heating (primary) 3 bar
Weight (empty) 215 kg

Hot water performances

Peak flow at 40°C 395 L/10’
Peak flow 1st hour at 40°C 935 L/60’
Continuous flow at 40°C 616 L/h
Peak flow 1st hour at 45°C 814 L/60’
Continuous flow at 45°C 528 L/h
Peak flow at 60°C 205 L/10’
Peak flow 1st hour at 60°C 521 L/60’
Continuous flow at 60°C 370 L/h
Input max (heating) LCV 22,4 kW
Input max (heating) HCV 24,9 kW
Output power max (80/60°C) 21,8 kW
Efficiency at 30% load (EN677) 104,0 %
Connection - heating 1 F Ø inches
Water pressure drop boiler at Δt = 20°C 20 mbar
Chimney connection 80 Ø mm
Operating voltage 230 V
Protection IP 30
Electrical consumption 185 W
NOx emissions max output 87 mg/kWh
Capacity expansion tank(s) - L
Dim. - Depth (w/o conn.) 990 mm
Dim. - Height (w/o conn.) 1570 mm
Dim. - Width or Diameter (w/o conn.) 590 mm
Dim. - Depth (with conn.) 960 mm
Dim. - Height (with conn.) 1650 mm
Dim. - Width or Diameter (with conn.) 590 mm
    • Technical brochure

    • BNE 2 Condens - Installation, operations and maintenance instructions

    • 3.41 MB – en

    • Marketing brochure

    • ACV Guide to Ecodesign and Energy Labelling

    • 947 KB – en

    • Energy Label

    • BNE 2 Condens

    • Product Fiche

    • BNE 2 Condens

Other products

Find an installer

Get in touch with an installer for a free, no obligation estimate.

Call ACV

Need some answers? Talk to a specialist

Tel. +32 2 334 82 20