HR s 800

Fast recovery stainless steel tank-in-tank cylinder

# 06633001

  • External heating source
  • Tanks
  • Floor installation
  • Low Heat loss - 100mm polyurethane insulation foam.
  • Outer shell vinyl jacket.
  • Connections to the primary return.
  • Vented or unvented use.
  • Thermostat and thermometer & high limit stat.
  • Can be used in batter formation for higher hot water output.
  • Mains pressure SystemPak available.
  • ***Anti-légionelles : température de stockage > 60°C.
  • ***Vanne de mélange thermostatique recommandée.
  • 5 YEAR WARRANTY (see our terms of sale)


  1. DHW return or temp/pressure relief valve connection.
  2. Manual air vent.
  3. Cold water inlet connection.
  4. Rigid top case.
  5. Stainless steel thermostat pocket.
  6. 100mm flexible polyurethane foam insulation.
  7. Outer shell vinyl jacket.
  8. DHW return connection.
  9. Primary inlet connection.
  10. Internal stainless steel DHW tank.
  11. External Tank (primary) steel.
  12. Primary return connection.


Capacity (total) 800 L
Heating surface DHW tank 4,56
Capacity (domestic hot water) 675 L
Connection - primary 2 F inches
Connection - DHW 6/4 M inches
Connection - re-circulation / safety valve 6/4 M inches
Primary flow (ΔT10K) do not use 7500 L/h
Pressure drop (primary - ΔT10K) 96 mbar
Max operating temperature 85 °C
Max operating pressure (DHW) 8,6 bar
Max operating pressure (primary) 4 bar
Weight (empty) 261 kg

Hot water performances

Peak flow at 40°C 1881 L/10’
Peak flow 1st hour at 40°C 4270 L/60’
Continuous flow at 40°C 2868 L/h
Peak flow 1st hour at 45°C 3660 L/60’
Continuous flow at 45°C 2458 L/h
Peak flow at 60°C 961 L/10’
Peak flow 1st hour at 60°C 2124 L/60’
Continuous flow at 60°C 1395 L/h
Max absorbed heat (Heat source: boiler) 100 kW
Operating voltage 230 V
Max design pressure (DHW) 10 bar
A 1955 mm
B 780 mm
C 335 mm
D 1585 mm
E - mm
Dim. - Height (with conn.) 1955 mm
Dim. - Width or O (w/o insul. and w/o conn.) 780 mm
Dim. - Depth (w/o conn.) 980 mm
Dim. - Height (w/o conn.) 1875 mm
Dim. - Width or Diameter (w/o conn.) 980 mm

Other products

HR s 600 Duplex

Fast recovery stainless steel tank-in-tank cylinder

HR s 320 Duplex

Fast recovery stainless steel tank-in-tank cylinder

HR s 600

Fast recovery stainless steel tank-in-tank cylinder

HR i 320

Tank in stainless steel with hand hole for installation on the floor.

Find an installer

Get in touch with an installer for a free, no obligation estimate.

Call ACV

Need some answers? Talk to a specialist

Tel. +32 2 334 82 20