HeatMaster® 200 F
High performance combined boiler and water heater
- TANK-IN-TANK TECHNOLOGY
- label_energy_FUEL
- Boilers
- DHW Production
- Standard
- Floor installation
# GTIN : 5400891032497
# P/N : A1002097
- Stainless steel tank-in-tank design
- Comprises a primary circuit which may also be used for a heating circuit.
- Body completely insulated in 50mm rigid polyurethane foam.
- Various fuel options, the HeatMaster ® 200 N comes with Gas, Oil, LPG or propane options.
- The HeatMaster ® 200 F is equipped with matched oil burner adapted to the combustion chamber of the boiler. The burner output on the HM200F model is increased to 196 kilowatts input.
- Build in primary circuit shunt HEP pumps, Primary expansion vessels, safety valve and low water safety switch.
- Control panel with main switch, summer / winter switch, time clock, control thermostat and combined temperature and pressure gauge, primary low water pressure indicator, burner lockout indicator, high limit cut off indicator and manual reset high limit thermostat.
- Flue reducer (vertical output option available).
- Domestic cold water inlet.
- Thermostat pocket.
- Connection for T+P valve ( optional).
- Automatic air vent.
- Rigid polyurethane foam insulation.
- Internal stainless steel tank.
- Low water pressure switch.
- Thermostat pocket.
- Control stat pocket
- HEP Boiler charge pump (X2).
- Thermostat pocket for ECS probe.
- Hot water flow.
- Heating flow.
- Primary expansion vessel (4x).
- Flue ways and turbulators.
- Heating return.
- Drain valve.
- Primary safety valve.
- Primary circuit.
- Combustion chamber.
Constructive characteristics |
||
|---|---|---|
| Capacity (total) | 641 | L |
| Capacity (primary) | 241 | L |
| Capacity (domestic hot water) | 400 | L |
| Capacity expansion tank(s) | 4 x 8 | L |
| Chimney connection | 250 | Ømm |
| Connection - heating | 2 F | Ø" |
| Connection - DHW | 2 M | Ø" |
| Connection - safety valve | 1 M | Ø" |
| Max operating temperature | 90 | °C |
| Water pressure drop boiler at Δt = 20°C | 190 | mbar |
| Max service pressure heating (primary) | 3 | bar |
| Max service pressure (DHW) | 8,6 | bar |
| Weight (empty) | 644 | kg |
Heating characteristics |
||
| Pre-heating time from 10 to 80°C (Heat source: boiler) | 27 | min |
| Heating time from 10 to 90°C | 46 | min |
Combustion |
||
| Input max (heating) HCV | 208,9 | kW |
| Input max (heating) LCV | 196 | kW |
| Combustion efficiency | 93,1 | % |
| Efficiency at 30% load (EN15502-1) | 94,5 | % |
| Efficiency (max output) 80/60°C | 92 | % |
| CO emissions max output | 4 | ppm |
| Mass rate of combustion products (gas) | 432 | kg/h |
| NOx class (EN15502) | 5 | |
| Output power max (80/60°C) | 180 | kW |
Domestic hot water performance |
||
| Peak flow at 40°C | 1675 | L/10’ |
| Peak flow 1st hour at 40°C | 5976 | L/60’ |
| Continuous flow at 40°C | 5161 | L/h |
| Peak flow at 45°C | 1444 | L/10’ |
| Peak flow 1st hour at 45°C | 5131 | L/60’ |
| Continuous flow at 45°C | 4424 | L/h |
| Peak flow at 60°C | 961 | L/10’ |
| Peak flow 1st hour at 60°C | 3126 | L/60’ |
| Continuous flow at 60°C | 2598 | L/h |
Electrical Characteristics |
||
| Voltage | 230 | V |
| Frequency | 50 | Hz |
| Protection IP | 30 | |
| Electrical consumption | 815 | W |
| Electrical power requirements | 3,5 | A |
Eco Design Fields |
||
| Seasonal space heating efficiency (35°C) | 81.8 | % |
Find an installer
Get in touch with an installer for a free, no obligation estimate.
Search on acv.com
A keyword, a reference, a range, a product,...
