- Stainless steel construction - no annode protection required.
- High quality insulation: 50 mm rigid polyurethane.
- Easy access control pod with thermostats and six pin plug for simple electrical connection
- hard wearing polypropylene finish
- vented or unvented use
- Mains pressure systempak available
- Residential or commercial use
- Can be used in battery formation for higher hot water output.
- Tank-in-Tank technology
Legend
- Auxiliary connection DHW
- Domestic cold water inlet.
- 50mm rigid polyurethane insulation
- Primary fluid inlet.
- Internal stainless steel tank.
- Return connection (primary circuit)
- Outer steel tank containing the primary fluid.
- Manual air vent
- Domestic hot water outlet
- Polypropylene lid
- Outer jacket, thick polypropylene shell
- Polypropylene reinforced base
Characteristics
| Capacity (total) | 413 | L |
| Heating surface DHW tank | 3,24 | m² |
| Capacity (domestic hot water) | 358 | L |
| Connection - primary | 6/4 F | inches |
| Connection - DHW | 6/4 M | inches |
| Connection - re-circulation / safety valve | 6/4 M | inches |
| Primary flow (ΔT10K) do not use | 6400 | L/h |
| Pressure drop (primary - ΔT10K) | 95 | mbar |
| Max operating temperature | 90 | °C |
| Max operating pressure (DHW) | 8,6 | bar |
| Max operating pressure heating (primary) | 4 | bar |
| Weight (empty) | 167 | kg |
Hot water performances
| Peak flow at 40°C | 1195 | L/10’ |
| Peak flow 1st hour at 40°C | 3151 | L/60’ |
| Continuous flow at 40°C | 2536 | L/h |
| Peak flow 1st hour at 45°C | 2608 | L/60’ |
| Continuous flow at 45°C | 2058 | L/h |
| Peak flow at 60°C | 620 | L/10’ |
| Peak flow 1st hour at 60°C | 1513 | L/60’ |
| Continuous flow at 60°C | 1153 | L/h |
| Pre-heating time from 10 to 80°C (Heat source: boiler) | 24 | min |
| Max absorbed heat (Heat source: boiler) | 88 | kW |
| Voltage | 230 | V |
| Max design pressure (DHW) | 10 | bar |
| A | 2024 | mm |
| B | 1705 | mm |
| C | 250 | mm |
| D | 660 | mm |
| Dim. - Height (with conn.) | 2024 | mm |
| Dim. - Height (w/o conn.) | 1959 | mm |
| Dim. - Width or Diameter (w/o conn.) | 673 | mm |
-
Technical brochure
-
Smart EW - Installation, operations and maintenance instructions
-
3.01 MB – en
-
Technical brochure
-
Smart Green - Installation, operation and maintenance instructions (2015)
-
1.13 MB – en
-
Technical brochure
-
Smartline SLE Plus Technical Manual UK
-
541 KB – en
-
Technical brochure
-
Smart / Smart EW - Addendum raccordo riscaldamento
-
82 KB – en
-
Technical brochure
-
Smart 320 420 600 - Installation, operation and maintenance instructions
-
1.70 MB – en
-
Technical brochure
-
Smart ME (SLME) - Installation, operations and maintenance instructions
-
2.79 MB – en
-
Technical brochure
-
Smart E (Plus) - Installation, operations and maintenance instructions
-
2.02 MB – en
-
Marketing brochure
-
ACV UK Product Guide 2016
-
10.44 MB – en
-
Marketing brochure
-
Smart
-
2.79 MB – en
Documentation
| Installation of an NTC sensor in the DHW cylinder. |
Other products
Fast recovery floor standing Tank-in-Tank Cylinder - standard 3kW immersion, perfect partner to cond...
Fast recovery Tank-in-tank cylinder with the addition of multiple ports allowing flexible installati...
Fast recovery Tank-in-tank cylinder with the addition of multiple ports allowing flexible installati...
Fast recovery Tank-in-tank cylinder with the addition of multiple ports allowing flexible installati...
Get in touch with an installer for a free, no obligation estimate.
