HR s 1000

Fast recovery stainless steel tank-in-tank cylinder

# 06633101

  • External heating source
  • Tanks
  • Floor installation
  • Low Heat loss - 100mm polyurethane insulation foam.
  • Outer shell vinyl jacket.
  • Connections to the primary return.
  • Vented or unvented use.
  • Thermostat and thermometer & high limit stat.
  • Can be used in batter formation for higher hot water output.
  • Mains pressure SystemPak available.
  • ***Anti-légionelles : température de stockage > 60°C.
  • ***Vanne de mélange thermostatique recommandée.
  • 5 YEAR WARRANTY (see our terms of sale)


  1. DHW return or temp/pressure relief valve connection.
  2. Manual air vent.
  3. Cold water inlet connection.
  4. Rigid top case.
  5. Stainless steel thermostat pocket.
  6. 100mm flexible polyurethane foam insulation.
  7. Outer shell vinyl jacket.
  8. DHW return connection.
  9. Primary inlet connection.
  10. Internal stainless steel DHW tank.
  11. External Tank (primary) steel.
  12. Primary return connection.


Capacity (total) 1000 L
Heating surface DHW tank 5,50
Capacity (domestic hot water) 840 L
Connection - primary 2 F inches
Connection - DHW 6/4 M inches
Connection - re-circulation / safety valve 6/4 M inches
Primary flow (ΔT10K) do not use 7800 L/h
Pressure drop (primary - ΔT10K) 101 mbar
Max operating temperature 85 °C
Max operating pressure (DHW) 8,6 bar
Max operating pressure (primary) 4 bar
Weight (empty) 308 kg

Hot water performances

Peak flow at 40°C 2265 L/10’
Peak flow 1st hour at 40°C 4940 L/60’
Continuous flow at 40°C 3210 L/h
Peak flow 1st hour at 45°C 4234 L/60’
Continuous flow at 45°C 2751 L/h
Peak flow at 60°C 1145 L/10’
Peak flow 1st hour at 60°C 2438 L/60’
Continuous flow at 60°C 1562 L/h
Max absorbed heat (Heat source: boiler) 112 kW
Operating voltage 230 V
Max design pressure (DHW) 10 bar
A 2355 mm
B 780 mm
C 335 mm
D 1985 mm
E - mm
Dim. - Height (with conn.) 2355 mm
Dim. - Width or O (w/o insul. and w/o conn.) 780 mm
Dim. - Depth (w/o conn.) 980 mm
Dim. - Height (w/o conn.) 2275 mm
Dim. - Width or Diameter (w/o conn.) 980 mm

Other products

HR s 800

Fast recovery stainless steel tank-in-tank cylinder

HR s 600

Fast recovery stainless steel tank-in-tank cylinder

HR s 600 Duplex

Fast recovery stainless steel tank-in-tank cylinder

HR i 600

Tank in stainless steel with hand hole for installation on the floor.

Find an installer

Get in touch with an installer for a free, no obligation estimate.

Call ACV

Need some answers? Talk to a specialist

Tel. +32 2 334 82 20